Manufacturing Process

01. Assembly Process

Our production workshop assembly line operation and fixed operation
combined, the first assembly after the final assembly, subject to manual
operation, but with a complete auxiliary tooling, for production pain
points, difficulties, will design the corresponding tooling, reduce the
difficulty of assembly, improve product quality..

02. Ultrasonic Welding

The use of high-frequency vibration waves to transfer to the surface of two
objects to be welded, under pressure, so that the surface of the two objects
friction with each other to form a fusion between the molecular layer,
compared with the traditional screw process, the plastic is completely
fused, making the product more tight.

03. Hot Melt Machine

By electric heating method, the heat of the heating plate is transferred
to the welding surface of the upper and lower plastic heating parts, so
that the surface is melted, and then the heating plate is quickly
withdrawn, and the melting surface of the upper and lower two heating
parts is fused, cured, and integrated into an instrument.

04. Laser Welding Machine

The high energy laser pulse is used to locally heat the material in a small
area, and the energy of the laser radiation diffuses to the interior of the
material through thermal conduction, melting the material to form a
specific melt pool.

05. Automatic Stamping Machine

Compared with ordinary rubber, NBR rubber has better oil resistance,
heat resistance and shock resistance.

06. Hydraulic Riveting Machine

The riveting force is large, the riveting efficiency is high, the vibration is
small, the noise is low, the riveting operation quality is reliable, and the
labor intensity of the workers is also reduced.

07. Automatic Dcrew Machine

Meet the quality and efficiency requirements of industrial automation.

08. Laser Marking Machine/ Carbon Dioxide Marking Machine

A variety of different material surfaces are marked with batch marking to
facilitate subsequent traceability issues.

09. Low Voltage Tester

In the production process, the product signal is prioritized for debugging
and testing to avoid the flow of defective products into the subsequent
process and reduce the product pass rate.

10. Micro Punch/Electric Micro Punch/Punch

Through the mold, can make blanking, punching, forming, drawing,
dressing, fine blanking, shaping, riveting and extruding parts.